Charles
By Order of the Liquidators
We hereby offer for sale by
Tender the contents of a
CUTTING DIE AND PRINTING PLATE
MANUFACTURER
VIEWING
VIEWING
CONTAINER GRAPHICS LIMITED
UNIT 2,
Offers to be received by close of business on
CHARLES
BUYERS
PREMIUM IS 10% PLUS VAT, IDENTIFICATION MAY BE REQUESTED
ALL GOODS ARE SOLD SUBJECT TO CONDITIONS OF
V.A.T. WILL BE ADDED TO ALL LOTS
WHERE APPLICABLE
Our Ref: CONTAINER
GRAPHICS LIMITED
To all interested parties,
we have been instructed by order of Various Liquidators to
offer by Tender Assets of CONTAINER GRAPHICS LIMITED
Offers are to be sent in
writing, completed tenders may be handed to a representative
Of Charles Taylor
Auctioneers on site or sent to our
closing dates stipulated:
Close of Business
Our address is
Envelopes should be clearly
marked Tender in the top left hand corner.
Attention is drawn to the
Conditions of Sale which will apply.
The purchasers are assumed
to have carefully inspected the equipment and satisfied
themselves as to the description and
condition before making an offer.
No warranty is given or
implied and no allowance whatsoever will be made !
The Vendors reserve the
right to refuse any or all offers.
We will endeavour
to notify all prospective purchasers whether they have been
successful or not, this normally
takes a few days, however we would be obliged if no
notification is received, you would
kindly contact our
or establish if there is any
delay in acceptance or rejection of offers.
Thank you
Yours faithfully
CHARLES
CONDITIONS OF
RE: CONTAINER GRAPHICS LIMITED
1. DEFINITIONS
Auctioneers Means Auctus
Limited trading as Charles Taylor (Company Number 03341922) whose registered
Buyer Means the
person, firm or company who purchases the Goods from the Auctioneers;
"Contract" Any
contract between the Vendor acting by the Auctioneers (as agents only) and the
Buyer for the sale and purchase of the Goods, incorporating these Conditions;
"Buyers Means
the commission payable on the "Tender/Private Treaty Price payable to
Charles Premium" Taylor by a Buyer at
the rates posted in the auction room at the time of the relevant sale plus VAT at the appropriate rate on such commission;
Expenses Means in relation to the sale of any
Goods, the Auctioneers charges and expenses, including but not limited to legal
expenses, charges for insurance, catalogue and other reproductions, customs duties,
packing or shipping costs, taxes, costs of testing, searches or enquiries
relating to any Goods or costs of collection from a defaulting Buyer plus an
amount in lieu of VAT if applicable on any expense incurred.
"Goods" Means any goods
agreed in the Contract to be supplied to the Buyer by the Vendor (including any
parts of them);
"Purchase Means
the Auctioneers' form of purchase order specifying details of the goods being
the Order" subject of the sale, the agreed price and signed by the
Auctioneers (on behalf of the Vendor) and the buyer.
"Tender Means
the tender document supplied by the Auctioneers to prospective buyers and
Document" which shall include
details of the goods which are the subject of the tender and the price offered
by the prospective buyer
"Vendor" Means
the person(s), firm or corporation from or through whom instructions for sale
of the Goods have been received by the Auctioneers;
2. APPLICATION OF TERMS
The Contract will be
on these Conditions to the exclusion of all other terms and conditions
(including any terms or conditions which
the Buyer purports to apply under any purchase order, confirmation of order, specification or
any other document).
3. CAPACITY OF AUCTIONEERS
The
Auctioneers sell as agents only for the Vendor (except where they are stated
wholly or partly to own any goods as principal) and as such are not responsible
for any default by the Vendor or the Buyer.
INITIAL
4. BUYER'S OBLIGATIONS TO INSPECT
All
Goods are sold with all faults and imperfections and errors of
description. Illustrations in catalogues
are for general identification only.
Buyers should satisfy themselves prior to the purchase as to the condition
of the Goods. Any statement by the
Auctioneers as to the Goods is a statement of opinion only and every person
should reply on his own judgment as to all matters affecting the Goods.
5. EXCLUSION OF LIABILITY
5.1 Neither the Vendor of
any Goods nor the Auctioneers, their servants or agents are responsible for
errors of description of for the authenticity of any Goods or for any
misstatement as to any matter affecting the Goods. Neither the vendor or any Goods nor the
Auctioneers, their servants or agents makes of gives, nor has any person in the
employment of the Auctioneers any authority to make or give, any representation
or warranty in relation to any Goods and any implied conditions or warranties
are excluded.
5.2 For the avoidance of
doubt, no Goods (the nature of which are motor vehicles) are warranted or held
out to be roadworthy and no Goods are warranted or held out to be of
satisfactory quality, fit for their purpose, safe for use or complying with any
statutory requirements for use, display or movement.
5.3 The Buyer acknowledges
and agrees that all terms implied by the Sale of Goods Act 1979 (as amended by
the Sale and Supply of Goods Act 1994) and any other statutorily implied terms
as to satisfactory quality and fitness for purpose are expressly excluded and
the Buyer shall not seek to rely upon any conditions or warranties implied
thereby.
5.4 No representations or
warranties are made by either the Vendor or the Auctioneers as to whether any
Goods are subject to Copyright, nor as to whether the Buyer acquires any
copyright in any Goods sold.
5.5 Every person on the
Auctioneers' premises before during or after the sale shall be deemed to be
there at his own risk and with notice of the condition of the premises and
their contents. Such persons shall have
no claim against the Auctioneers in respect of any injury sustained or any
accident which may occur from any cause whatsoever.
6. LIMITATION ON CLAIMS
Without prejudice to
the provisions of clause 5 above, and save insofar as it relates to any
liability which the Auctioneers may have for personal injury or death, any
claim against the Auctioneers by the Buyer shall be limited to the purchase
price actually paid by the Buyer to the Auctioneers with regard to the Goods.
7.
7.1 Conduct
Where sale of the
goods is by tender:
7.1.1 The Auctioneers may without giving any
reason refuse to accept the tender of any person and to refuse admission to it's
premises to any person
7.1.2 In the case of a
dispute as to any tender, the Auctioneers may immediately determine the dispute
or accept the last undisputed tender or withdraw the relevant Goods
7.1.3 The Vendor may tender
for any Goods either personally or through the Auctioneers or through any other person as many times
as they respectively may think fit and may withdraw any Goods
INITIAL
7.2 Contract
7.2.1 Any prospective buyer
submitting a tender shall do so by signing and dating the tender Document and
returning it to the Auctioneers. The
signing of the Tender Document by the Buyer shall constitute a formal offer to
purchase on the terms contained therein
7.2.2 The Contract shall be
concluded by the acceptance by the Auctioneers of the successful tender, upon the signing and
dating of the relevant Tender Document by the Auctioneers
7.2.3 Notification of
conclusion of the Contract shall be sent to all prospective buyers, and the
successful Buyer shall receive a copy of the Tender Document signed by the
Auctioneers together with an invoice for the Goods
8.
The contract for sale
of goods by private treaty will be concluded by the signing and dating of the
Purchase Order by both parties.
9. TERMS OF PAYMENT
Payment of the price
for the Goods is due within 7 days after the date of the Auctioneers'
invoice. Payment shall be made by
Bankers Draft or by cash in pounds sterling and payment will not be deemed to
have been made until the Auctioneers are in receipt of cash or cleared funds.
10. REMEDIES FOR NON-PAYMENT
10.1 If the total amount
due for the Goods is not paid in accordance with Clause 9, the Auctioneers
shall have the discretion, and without prejudice to any other rights which the
Auctioneers and the Vendor may have, be entitled, both on the Auctioneers own
behalf and as agent for the Vendor, to exercise any one or more of the
following rights or remedies:-
10.1.1 Commence proceedings against the Buyer for
damages for breach of contract;
10.1.2 Rescind the contract;
10.1.3 Apply any payments made
by the Buyer to the Auctioneers as part of the total purchase price or
otherwise towards any costs or expenses incurred in connection with the sale
and/or resale of the lot;
10.1.4 Apply any payments made
by the Buyer to the Auctioneers as part of the total purchase price or
otherwise towards any debts owed by the Buyer to the Auctioneers in respect of any other
transaction;
10.1.5 Arrange and carry out a
resale of the Goods by public auction or private sale in mitigation of the debt
owed by the Buyer to the Auctioneers.
The net sale proceeds shall be applied in reduction of the Buyer's debt. If a resale results in a lower price than the
original purchase price under the Contract, then both the Auctioneers and the
Vendor shall be entitled to claim the balance from the Buyer together with any
costs and Expenses incurred in connection with the resale. If the resale results in a higher price than
the original purchase price under the Contract then the surplus shall be paid
to the Vendor. In such case the Buyer
waives any claim it may have to title to the Goods and agrees that any resale
price shall be deemed commercially reasonable;
INITIAL
10.1.6 Exercise a lien over any
of the Buyer's property which is in he possession of the Auctioneers for any reason until payment of
all outstanding amounts due to the Auctioneers by the Buyer have been paid in
full. If the amount outstanding then
remains unpaid for 14 days following notice being given to the Buyer by the
Auctioneer of the exercise of the Lien, then the Auctioneers shall be entitled
to sell such property in accordance with Clause 10.1.5 above;
10.1.7 Charge the Buyer the
reasonable legal and administrative costs of the Auctioneers and the Vendor;
10.1.8 Charge the Buyer
interest at a rate of 5% per annum above the base rate of Barclays Bank Plc
from time to time due on the total purchase price under the Contract or any
outstanding balance thereof to the extent that it remains unpaid of the date
for payment;
10.1.9 Insure,
remove and store the Goods either at the Auctioneers' premises or elsewhere at
the sole risk and expense of the Buyer
11. RISK AND TITLE
11.1 The goods shall be at the Buyer's risk from
the date of the Auctioneers' invoice.
11.2 Ownership
if the Goods shall not pass to the Buyer until the Auctioneers have received in
full (cash or cleared funds), all sums due to it in respect of;
11.2.1 The goods; and
11.2.2 All the other sums which are or which
become due to the Auctioneers from the Buyer on any account.
11.3 No
warranty is given by the Auctioneers that the Vendor owns or is entitled to
pass good title to any lot.
12. COLLECTION
12.1 The
Buyer shall not remove any lot at the time of sale until such time as payment
of the Total Price has been made in full in accordance with Clause 7 above.
13. PURCHASE OF MOTOR VEHICLES
The Buyer of any motor
vehicle is responsible for complying with all legal requirements as to the
construction and use of that vehicle and for obtaining all certificates,
permits or other authorizations necessary before that vehicle can be used on
any road.
14. HEALTH AND SAFETY AT WORK ETC
ACT 1974
It is expressly
brought to the Buyer's attention that;
14.1 At the time of sale any
items of plant, machinery or equipment contained in the lot(s) may not
necessarily comply with the Health and Safety at Work etc Act 1974 or any other
Act or Acts or Regulations thereunder governing the
use of that plant, machinery or equipment in a working environment. A Buyer of any such plant, machinery or
equipment is hereunder required to ensure that the use of the same at a place
of work within the
INITIAL
14.2 Certain types of plant,
or main service installations could contain blue and white asbestos, dangerous
chemicals etc, which if not handled correctly during their removal from the
site could be in breach of the Health and Safety at Work etc Act 1974, or any
other current legislation covering the use of such substances in a working
environment.
15.
In the event that the
Buyer sells on the lot or part thereof to a third party before payment of the
Total price is made in full o the Auctioneers (per clause 9) the Buyer agrees
to hold on trust for the Auctioneers the proceeds of that sale in a separate
bank account to the extent of all amounts outstanding and due to the
Auctioneers by the Buyer in respect of any lot.
16. SEVERABILITY
In the event that any
provisions of these conditions should be held unenforceable for any reason, the
remaining conditions shall remain in full force and effect.
17. JURISDICTION
These conditions shall
be governed by and construed in accordance with English law. All transactions to which these conditions
apply and all connected matters shall also be governed by English Law
Acknowledgement of the
Terms & Conditions of
I
have read pages 1-4 of the Terms and Conditions of Sale and fully considered
sections 1 to 17 contained therein.
I
acknowledge these Terms and agree to abide by them.
SIGNATURE:
.
BLOCK
CAPITALS:
.
POSITION
IN COMPANY:
.
DATE:
.
|
|
1 |
2 PART/3 PART EASYBENDER AUTOMATED RULE PROCESSOR
CONSISTING OF VARIOUS TOOLING BLOCKS, MISC SPARE PARTS, 8 RULE CASSETTES,
MISC RULE, CONTROL PC & SOFTWARE |
£
.. |
|
|
2 |
DATATECH 2.2KW ROTARY/FLATBED LASER CONSISTING OF 2500mm
x 1600mm FLATBED CUTTING AREA, 3000mm ROTARY CUTTING LENGTH, CUTS CYLINDER
SIZES 257mm - 560mm, PRC RESONATOR - PULSES * CW CAPACITY, DRILLING FACILITY
ON ROTARY SECTION, SPARE ROTARY SHAFT, CHILLER UNIT, EXTRACTOR FAN, CONTROL
PC & SOFTWARE & MISC SPARE PARTS |
£
.. |
|
|
3 |
ZUND S-800 RUBBER CUTTER CONSISTING OF 700mm x 700mm
CUTTING AREA, CAN CUT UP 25mm THICK RUBBER (17mm VULCAN 50kg), 7.5Ί OFFSET
OPTION, VARIOUS SPARE PARTS INCLUDING SPARE BLADES, CONTROL PC & IMPACT
RUBBER NESTER SOFTWARE |
£
.. |
|
|
4 |
ALUP SOLO 15 VARIABLE SPEED ROTARY AIR COMPRESSOR
CONSISTING OF 500 LITRE AIR RECEIVER, DENCO REFRIDGERATED C321-2 AIR DRYER
(65cfm), 7.5Ί OFFSET OPTION, VARIOUS SPARE PARTS INCLUDING SPARE BLADES,
CONTROL PC & IMPACT RUBBER NESTER SOFTWARE |
£
.. |
|
|
5 |
MULTICO CIRCULAR SAW CONSISTING OF 3 PHASE, 300mm -
400mm DIAMETER BLADE CAPABILITY, CUTTING GUIDE FENCE |
£
.. |
|
|
6 |
CGC 487mm ROTARY DIE PROOFER CONSISTING OF 3 PHASE,
3000mm CYLINDER LENGTH, FULL WARE BOLT PATTERN, ADJUSTABLE CUTTING IMPRESSION,
FWD/REVERSE |
£
.. |
|
|
7 |
3 PART/4 PART EASYBENDER TURBO AUTOMATED RULE PROCESSOR
CONSISTING OF VARIOUS TOOLING BLOCKS, MISC SPARE PARTS, HYDRAULIC CASSETTE
CHANGER, 8 RULE CASSETTES, MISC RULE, CONTROL PC & SOFTWARE |
£
.. |
|
|
8 |
DATATECH DT2200 SAMPLE MAKER/PLOTTER CONSISTING OF
2000mm x 2300mm PLOTTING/CUTTING AREA, RECIPROCATING KNIFE, CREASING WHEEL
& FIXED DRAG KNIFE, PEN PLOTTER, VARIOUS SPARE PARTS, CONTROL PC &
SOFTWARE |
£
.. |
|
|
9 |
CGL ROTARY RULING CYLINDER, 487mm x 3200mm THICK WALL
& MOTORISED STAND, WARD BOLT PATTERN & WARD STRIPPING JIG SHAFT |
£
.. |
|
|
10 |
CGL ROTARY RULING CYLINDER, 487mm x 2030 mm THICK WALL
& STAND, WARD BOLT PATTERN |
£
.. |
|
|
11 |
CGL ROTARY RULING CYLINDER, 487mm x 2900 mm THICK WALL
& STAND, WARD BOLT PATTERN |
£
.. |
|
|
12 |
CGL ROTARY RULING CYLINDER, 487mm x 3200 mm THICK WALL
& STAND, WARD BOLT PATTERN |
£
.. |
|
|
13 |
CGL ROTARY RULING CYLINDER, 487mm x 2530 mm THICK WALL
& STAND, WARD BOLT PATTERN |
£
.. |
|
|
14 |
CGL ROTARY RULING CYLINDER, 487mm x 2920 mm THICK WALL
& STAND, MARTIN 1636 BOLT PATTERN, POSILOCK RELIEF |
£
.. |
|
|
15 |
CGL ROTARY RULING CYLINDER, 270mm x 2400 mm THICK WALL
& STAND, MARTIN 924 BOLT PATTERN |
£
.. |
|
|
16 |
CGL ROTARY CYLINDERS, 177mm x 1800 mm THIN WALL (NO
STAND) NO MOUNTING HOLES, 355mm x 1800 mm THIN WALL (NO STAND) NO MOUNTING
HOLES, 385mm x 1800 mm THIN WALL (NO STAND) NO MOUNTING HOLES |
£
.. |
|
|
17 |
LOT CONSISTING OF THE FOLLOWING SIZED RULING CYLINDERS,
NO STAND OR MOUNTING HOLES: 177mm x 1500mm THICK WALL, 211mm x 1500mm THIN
WALL, 257mm x 1500mm THIN WALL, 275mm x 1500mm THIN WALL, 293 x 1500mm THIN
WALL, 324mm x 1500mm THIN WALL, 333mm x 1500mm THIN WALL, 2 OFF 355mm x
1500mm THIN WALL, 2 OFF 360mm x 1500mm THIN WALL, 366mm x 1500mm THIN WALL,
381mm x 1500mm THIN WALL, 535mm x 1500 THIN WALL, 560mm x 1500mm THIN WALL |
£
.. |
|
|
18 |
ROTARY SAWING JIG CONSISTING OF CUTAWL K-11 SAW, 2420mm
MAXIMUM SHELL LENGTH, ADJUSTABLE FROM 177mm - 640mm, PNEUMATIC BRAKE,
INDEXING OPTION, COMPLETE WITH ROUTING/DRILING JIG: 3000mm MAXIMUM SHELL
LENGTH, MANUAL BRAKE, ADJUSTABLE CYLINDER DIAMETERS |
£
.. |
|
|
19 |
1 OFF METAL WORK BENCH WITH 10 ITEMS I.E. SEALEY 8"
BENCH GRINDER, 3 x NOTTING STEEL MANIPULATORS (MANUAL), 3 x UNMARKED
MANIPULATORS, No.4 WORK RECORD VICE AND 2 x MANUAL FLY PUNCHES (1 NORTON
& 1 SWEENY) |
£
.. |
|
|
20 |
1 OFF METAL WORK BENCH WITH 7 ITEMS I.E. SILVERLINE
DOUBLE ENDED BENCH GRINDER, RECORD IRWIN VICE AND 4 x VARIOUS STEEL
MANIPULATORS |
£
.. |
|
|
21 |
1 OFF METAL WORK BENCH WITH 7 ITEMS I.E. RECORD IRWIN
VICE, DRAPER DOUBLE ENDED BENCH GRINDER, 4 x STEEL MANIPULATORS, EMPTY CLARKE
SMALL TOOL BOX |
£
.. |
|
|
22 |
1 OFF METAL WORK BENCH WITH 4 ITEMS I.E. ROEBUCK DOUBLE
ENDED BENCH GRINDER, SMALL RECORD IRWIN VICE, 2 x STEEL MANIPULATORS |
£
.. |
|
|
23 |
1 OFF METAL WORK BENCH WITH 5 ITEMS I.E. RECORD IRWIN
VICE, SILVERLINE DOUBLE ENDED BENCH GRINDER, 3 x STEEL MANIPULATORS |
£
.. |
|
|
24 |
METAL WORK BENCH TOGETHER WITH SEALEY 12 SPEED DESK TOP
PILLAR DRILL, KINZO 8ELL1 DESKTOP PILLAR DRILL, 2 x STEEL MANIPULATORS |
£
.. |
|
|
25 |
1 SMALL |
£
.. |
|
|
26 |
1 SMALL |
£
.. |
|
|
27 |
1 SMALL |
£
.. |
|
|
28 |
1 SMALL |
£
.. |
|
|
29 |
1 METAL TABLE FITTED WITH 4 MANUAL FLY PRESSES USED FOR
MITSIBUSHI CREATING DYES - 2 x NO.1 AND 2 x NO.2 |
£
.. |
|
|
30 |
BLUE METAL WORK BENCH |
£
.. |
|
|
31 |
LARGE INDUSTRIAL PLATFORM SCALES 0.250kg |
£
.. |
|
|
32 |
1 OFF PALLET TRUCK & 1 OFF SACK TRUCK |
£
.. |
|
|
33 |
2 x RED STILLAGE STORAGE RACKS |
£
.. |
|
|
34 |
WORK TABLE INCLUDING 11 x VARIOUS HAND POWER TOOLS I.E.
MAKITA JIGSAW, MAKITA CORDLESS HAND DRILLS, DEWALT CORDLESS DRILL, 1 x DEWALT
JIGSAW, AEG ANGLE GRINDER, MAKITA HAND DRILL, BOSCH ROUTER, SPARE BATTERIES |
£
.. |
|
|
35 |
MISC HAND TOOLS COMPRISING OF 3 x DEWALT ROUTERS, 12 x
VARIOUS PNEUMATIC HAND TOOLS (DISPLAYED UNDER TABLE) |
£
.. |
|
|
36 |
WORK TABLE CONSISTING OF VARIOUS HAND POWER TOOLS I.E. 2
x MAKITA CORDLESS DRILLS, |
£
.. |
|
|
37 |
MISC HAND TOOLS CONSISTING OF SEALEY 8" BENCH
GRINDER (BOXED), 2 x DEWALT BENCH GRINDERS, DRAPER 400mm FRET SAW, MAKITA
ROUTER |
£
.. |
|
|
38 |
PREMIER FLOOR BUFFER |
£
.. |
|
|
39 |
METAL TOP WORK WOODEN BENCH TOGETHER WITH VARIOUS HAND
TOOLS INCLUDING 4 x TOOL BOXES, SPANNERS, AXLE SAW, GREASE GUN, SCREW
DRIVERS, DRILLS, G-CLAMPS ETC |
£
.. |
|
|
40 |
METAL TOP WORK WOODEN BENCH TOGETHER WITH SMALL QUANTITY
OF ITEMS I.E. SAFETY EAR PROTECTORS, EYEWEAR, HATS, MANUAL BANDER, TAPE
DISPENSERS ETC |
£
.. |
|
|
41 |
2 x METAL BENCHES INCLUDING 3 x MANUAL NOTCHERS & 3
x CUTTERS, REM DOUBLE ENDED BENCH GRINDER ON STAND |
£
.. |
|
|
42 |
1 METAL TOP TIMBER WOODEN BENCH INCLUDING No.4 RECORD
VICE, 1 x METAL STRIP SHEARER, LARGE QUANTITY OF BOBST STRIPPING PARTS
CONTAINED ON 6 SHELF GREY UNIT WITH BINS ALL COMPLETE WITH BOBST STOCK |
£
.. |
|
|
43 |
2 OFF METAL TOP WOODEN WORK BENCHES TOGETHER WITH 6
ITEMS INCLUDING 3 x RICHARDS TYPE BENDERS, 2 x NOTCHERS, 1x MANUAL, RULE
PULLERS, VARIOUS BENDING DYES TO SUIT, 1 PC BASE UNIT, 2 MONITORS, 1 BROTHER
HL1250 LASER PRINTER |
£
.. |
|
|
44 |
METAL SHAPED WORK BENCH TOGETHER WITH 4 ITEMS I.E. 1
STRIP SHEAR, 1 x NOTCHER, 2 x NOTTINGS NOVA BENDERS, BENDING DYES |
£
.. |
|
|
45 |
|
£
.. |
|
|
46 |
1 BAY CONTAINING QUANTITY OF 12, 15 & 18mm PLY WOOD |
£
.. |
|
|
47 |
QUANTITY OF CURVED PLY WOOD TIMBER SHELLS |
£
.. |
|
|
48 |
LARGE QUANTITY OF VAIROUS FLATBED STEEL RULES ON 6
SHELVED STEEL RACK |
£
.. |
|
|
49 |
1 CUPBOARD AND 4 COMPLETE SMALL CUPBOARD HOLDING VARIOUS
PERF-A-TYPE CHARACTERS, GLUE, DYE MAKING EQUIPMENT |
£
.. |
|
|
50 |
QUANTITY OF VARIOUS DYE MAKING RUBBER FIXINGS, DEX
RACING AND WALL MOUNTED LIN BINS |
£
.. |
|
|
51 |
MITUSBISHI STRIPPING COMPONENTS I.E. LIFTERS, SNAP
PLATES, SPRINGS, PUSHER LEGS, METAL TRAY FIXINGS, RETAINING PINS TOGETHER
WITH PLASTIC BUCKETS/TRAYS |
£
.. |
|
|
52 |
MISC |
£
.. |
Published
by C.T.A.S. *
